Gorman Rupp OTS 2″, 1/2 HP AMT Submersible Drainage/Sump Drainage Pump
July 31, 2010
There are many times when the unexpected minor to moderate annoying and disruptive water leak can interfere with the normal operation of the home or small office. The optimum solution to managing this type of problem is the availability of a small, lightweight submersible pump that can easily displace that water.
The OTS 2″, 1/2 HP AMT Submersible Drainage/Sump Drainage Pump is an ideal choice to fulfill that responsibility. Designed for use in sump pits, drainage pits, overflow tanks, basements, excavation, and construction drainage, it is a reliable, low cost, low maintenance, and effective tool for any household or small business. Read more
Gorman Rupp OTS 41″ Stainless Steel 1/2 HP AMT Industrial Sump Pump with 3/4″ Solids Handling with 2″ Port
July 26, 2010
It may not happen that often, fortunately, that a leak or other semi-major catastrophe requires pumping out water at a rate exceeding 100 gallons per minute, but when it does, it’s a great feeling to own a pump that sees this as an average day’s challenge. With a Gorman Rupp stainless steel ½-HP AMT industrial sump pump-solids handling with 2″ port, you’ll be up to this challenge, and you’ll be able to handle ¾ inch solids as well. Read more
Gorman Rupp 39″ 3/4 HP AMT Commercial/Industrial Sump Pump
July 20, 2010
Imagine finding yourself in a situation where you must pump out water at a rate of over 85 gallons per minute just to stay ahead of a catastrophe. Imagine how great you’d feel if you had a pump that could do this job as part of its normal day’s work. With a Gorman Rupp Pedestal Sump Pump , you’ll be up to the challenge.
This industrial grade Gorman Rupp, stainless steel sump pump, which is UL, CSA, and SSPMA certified, has a 1.5-inch NPT discharge port. The pump is driven by a Totally Enclosed Fan Cooled (TEFC) engine to provide maximum power with minimum heat buildup, and can operate at a maximum temperature of 200 degrees F. It is supplied with an 8-foot 16/3 115VAC line cord and an automatic switch. It is the ideal water pump for use in less-than-pristine pumping conditions including wastewater removal. Read more
Gorman Rupp OTS 1″, 1/8 HP, AMT Submersible Drainage/Sump Utility Pump
July 4, 2010
There is no convenient time for a water leak in your home or your business office. When such annoyances do occur, however, there is a certain comfort in knowing that you have the proper tool for minimizing the impact of the water incursion and getting your home life or business activities back to normal. The Gorman Rupp Submersible Drainage/Sump Drainage Pump has provided that aid and comfort to many. It is a small, lightweight submersible pump that can manage moderate water problems easily. The pump was designed specifically for occasional use in sump pits, drainage pits, overflow tanks, basements, excavation, and construction drainage situations. It is a most effective tool; reliable, low cost, and low maintenance. Read more
Gorman Rupp Pump OTS 2″ GR Stainless Steel Submersible Pump with 1 HP, 115 V Single Phase Electric Motor
June 30, 2010
Wherever a minor catastrophe requires removal of several feet of standing water pooled up in a leaky basement, or a pool or spa needs to be emptied, or a flooded pit at a construction site needs to be drained, you’ll need a water pump with the proven gumption to do the job efficiently; a reliable, dependable, and robust tool that can move large volumes of water quickly over a long period of time. If any of these images are descriptive of your typical water management needs, the OTS 2″ GR Stainless Steel Submersible Pump is the one that should be foremost in your planning. Read more
Gorman Rupp OTS 1.25″, 1/3 HP AMT Submersible Drainage/Sump Vortex Pump
June 24, 2010
Nothing can be as annoying and disruptive as a minor but unexpected water leak. It interferes with the normal operation of the home or office, and nothing productive can be accomplished until the water is removed. In this type of situation, it’s comforting to know that you have a small, lightweight, and reliable pump on hand that can manage the problem easily. The OTS 1.25″, 1/3 HP AMT Submersible Drainage/Sump Drainage Pump is the ideal pump for providing that management. The pump was originally designed for moderate pumping demands in sump pits, drainage pits, overflow tanks, basements, excavation, and construction drainage applications. It is a reliable, low cost, low maintenance, and effective tool for any household or small business. Read more
Tsurumi 6″ Heavy-Duty Trash Pump
June 22, 2010
Flood control, continuous drainage from large construction projects, dewatering mines, and moving the pulp sludge in paper manufacturing; these are all water management challenges that are readily handled by a high-quality trash pump. Pumps that are not designed specifically for moving water and sludge with suspended solids will clog and fail quickly in these conditions. It takes a special rugged high-quality pump to move large amounts of water that contains mud, leaves, twigs, sand, sludge, and other hard and soft solids, and to do so at pumping rates of thousands of gallons per minute. Read more
Multiquip 1083 GMP Deutz F2L2011 Trash Pump – MQ62TDD
June 22, 2010
Trash pumps are designed to handle large amounts of debris, which is why they have become the contractors’ tool of choice for handling dirty municipal and industrial dewatering projects. Pumping flood waters, draining mine shafts, and construction site drainage are three typical examples of the challenges that are readily handled by these high-quality pumping workhorses. It takes a rugged, well-built pump to move large volumes of water containing leaves, twigs, mud, gravel, and other sludge at high pumping rates.
Multiquip 1083 GMP Deutz Trash Pump
Pumps with these demanding capabilities are expected to perform for long periods of time in extremely harsh conditions without failure, clogging, or significant maintenance downtime. They must be also be designed to minimize downtime by allowing rapid disassembly and reassembly for routine service using common tools. Trash pumps must offer optimum performance when operating conditions are the most demanding. That is their primary challenge; a challenge easily accepted by the Multiquip 1083 GMP Deutz Trash Pump.
The Multiquip MQ62TDD Welcomes a Challenge
The Multiquip MQ62TDD trailer-mounted trash pump will move water containing particles of up to two inches in diameter with ease through its 6-inch suction and discharge ports. This Multiquip pump is ideal for dewatering in most municipal, industrial, and construction situations. It is driven by an electrically started, 29 horsepower, Deutz F2L2011 diesel engine that will pump dirty water at a rate of 1083 gallons per minute. Its 16-gallon gas tank, which is integrated into the pump’s mounting skid, provides the pump with a continuous running time of approximately seven hours without refueling. The pump provides automatic protection against engine damage by shutting down under low oil conditions.
Features of this water pump include:
• A 29 HP Deutz F2L2011 diesel engine with low oil shutdown
• Max. Water Capacity: 1083 gallons per minute
• Suction x Discharge: 6 inches X 6 inches
• Maximum Lift: 25 feet
• Maximum Head: 100 feet
• Maximum Pressure: 43.3 psi
• Fuel Tank Capacity: 16 gallons
• Fuel Type: Diesel
• Overall Dimensions: 56″ L x 36″ W x 56″ H
• Running time of approximately 7 hours
• Weight: 1560 pounds
• Maximum solids: 2 inch diameter
• Electric start
This Multiquip 1083 GMP Deutz Trash Pump is designed and engineered to meet the rigorous demands placed upon a trash pump by professional contractors. Multiquip trash pumps are rugged with a history of dependability; ideal for moving water with high amounts of solid content. Sticks, stones, and other debris pass through the pump with ease, minimizing clogging. Multiquip has been manufacturing top quality dewatering pumps for over twenty years, and their pumps are found at construction sites all over the world. This Multiquip MQ62TDD pump is a top performer that is perfect for all larger dewatering projects.
Gorman Rupp OTS 1.25″, 1/3 HP AMT Submersible Drainage/Sump Vortex Pump
June 14, 2010
Nothing can be as annoying and disruptive as a minor but unexpected water leak. It interferes with the normal operation of the home or office, and nothing productive can be accomplished until the water is removed. In this type of situation, it’s comforting to know that you have a small, lightweight, and reliable pump on hand that can manage the problem easily. The OTS 1.25″, 1/3 HP AMT Submersible Drainage/Sump Drainage Pump is the ideal pump for providing that management. The pump was originally designed for moderate pumping demands in sump pits, drainage pits, overflow tanks, basements, excavation, and construction drainage applications. It is a reliable, low cost, low maintenance, and effective tool for any household or small business. Read more
Gorman Rupp OTS 1″, 1/8 HP, AMT Submersible Drainage/Sump Utility Pump
June 8, 2010
There is no convenient time for a water leak in your home or your business office. When such annoyances do occur, however, there is a certain comfort in knowing that you have the proper tool for minimizing the impact of the water incursion and getting your home life or business activities back to normal. The Gorman Rupp OTS 2″, 1/2 HP AMT Submersible Drainage Sump Pump has provided that aid and comfort to many. It is a small, lightweight submersible pump that can manage moderate water problems easily. The pump was designed specifically for occasional use in sump pits, drainage pits, overflow tanks, basements, excavation, and construction drainage situations. It is a most effective tool; reliable, low cost, and low maintenance. Read more
